Campbell Hausfeld Air Compressor, 80 Gallon Vertical Two Stage 25CFM 7.5HP 208-230V 1PH (TF211201AJ) product image center
Zoom image

80 Gallon 2 Stage Air Compressor (TF211201AJ)


Score: 3.23. Votes: 22

  • Commercial Duty Cast Iron, Oil-Lubricated, Two Stage Pump
  • Mounted and wired motor starter for quick electrical hook up
  • Industrial-rated NEMA motor for reliable service

The Campbell Hausfeld 80-gallon, 7.5 hp, vertical, two-stage air compressor (TF211201AJ) has a high air flow of 25 CFM @ 90 PSI to power multiple, high-demand air tools, including air sanders. Its industrial-rated NEMA motor has an 80% duty cycle and drives a cast-iron, two-stage pump that’s designed to deliver more than 15,000 hours of operation. A prewired magnetic starter provides save and clean power with a safe shop installation.

  • Commercial Duty Cast Iron, Oil-Lubricated, Two Stage Pump
  • Mounted and wired motor starter for quick electrical hook up
  • Industrial-rated NEMA motor for reliable service
  • Fully enclosed metal belt guard for safe operation
  • 80 Gallon Tank
  • 25.0 CFM @ 90 PSI
  • 175 Max PSI
  • 230 Volt, 31 Amp, 1PH, 60 Hz Electrical

  • Air Compressor
    • Compressor Tank Style
    • Compressor Tank (Gallons)
    • Compressor Horsepower
    • Max PSI
    • Compressor SCFM@40PSI
    • Compressor SCFM@90PSI
    • Compressor CFM@Max PSI
    • Compressor Voltage
    • Compressor Amps
    • Compressor Phase
    • Pump Type
      Two Stage
    • Lubrication
      Oil Lube
    • Special Features
      Metal Belt guard
    • Compressor Duty Cycle
    • dBA @ 3ft
  • General
    • Weight
    • Power Source
      Electric Induction
    • UPC
    • Commercial
    • Shipping Dimensions Length
    • Shipping Dimensions Width
    • Shipping Dimensions Height
    • Cube FT
    • Warranty
      3 Year Limited Warranty
    • UL Safety Listing
    • CSA Safety Listing
    • ETL Safety Listing
    • Prop 65
Product Attachment
Also Viewed
No Articles related to this product
No Videos related to this product
Customer reviews
Average rating:

Score: 3.23. Votes: 22
Rating of votes (22)
7 customers
2 customers
4 customers
7 customers
2 customers
  • Michael R Huff
    Oct 16, 2018, 14:12
    I purchased this "Industrial Rated" compressor in March 2018 and have had nothing but problems with it. The thermal switch on the motor would kick off 6-10 times a day. The compressor had a flawed casting that leaked oil everywhere. It burned the drive belt off after re-adjusting it 3 times (once adjusted by a Campbell Hausfeld warranty technician). Now the check valve is leaking massively. C. H. replaced the leaking compressor housing under warranty, which fixed the oil leak. Their technician sent me a higher rated Thermal Switch, which, at this point has fixed the kicking off problem. In the 7 months that I have had this unit, it has only run for 3 months due to these problems. C. H. would do nothing about it burning the belt on the unit, so I (at my expense) replace the pulley and belt with a 2-groove pulley and 2 new belts. I purchased this unit to replace a 15 year old Delta Compressor that is rated nearly 1/2 the rated CFM of the C. H. The Delta performed flawlessly for the 15 years, but was getting to the point where it wouldn't keep up (simply worn out). With the higher rated CFM of the C. H., I expected more, but got less. I am still waiting for C. H. warranty service to fix the faulty check valve. In my opinion, this is an inferior quality compressor.

Campbell Hausfeld’s wide selection of air compressors means there’s a choice that’s right for everyone. Whether you use an air compressor once a year or every day, whether it’s at home, in the shop or on the move, there’s a Campbell Hausfeld air compressor to help you get the job done.